The Paslode Pneumatic LiteLine C1 50 Bradder drives fine C1 Series 18GA brads up to 50mm in length. Compact and lightweight, the tool is designed for comfort and reliability for volume projects.



  • Pneumatic technology for reliability and all weather performance
  • Corrosion resistant aluminium housing for long life
  • Bypass nail follower for easy and fast re-loading
  • Ergonomic design with non-slip hand grip to improve comfort and safety
  • Sequential and bump fire mode

Previous models

Product CodeB20060
Operating Pressure 5.5 to 8.3bar (80 to 120psi)
Dimensions (L x H x W)50 x 230 x 243mm
Air Consumption at 6.9bar (100psi)0.020 cu. Ft. / cycle
Collation TypeAdhesive
Magazine Capacity100 brads
Cycle Rate Per Second5 brads
Brad Range Length (1.2mm Brads)13-50mm
Brad Diameter1.2mm (18 gauge)
Brad TypeC1 series
Recommended Air Fitting Diameter  6-10mm
Fine trim and moulding
Craft D.I.Y applications
Native timbers (shiplap and tongue and groove boards)
Picture framing

Featured Video

How to maintain and clean your Paslode Pneumatic Tool

This video shows best practice for caring for your Paslode Pneumatic tool.

Watch Our Videos On YouTube

For more tips, customer stories and product-specific videos visit our YouTube channel via the button below.

Fastener Charts

Nails Compatible with Paslode Pneumatic Liteline C1 50 Straight Bradder

Here’s a list of recommended fasteners to use with your Paslode Pneumatic Liteline C1 50 Straight Bradder.


Product CodeLengthBrad (Gauge)FinishHeadFuel CellsBox Qty
B2007525mmC1 Series (18ga)Electro GalvLost500075000
B2007730mmC1 Series (18ga)Electro GalvLost500075000
B2008140mmC1 Series (18ga)Electro GalvLost500050000
B2008550mmC1 Series (18ga)Electro GalvLost500045000